How To Use (step by step)
- Take a grey Trunk-Vac half and a clear Trunk-Vac half from each bag.
2. Align the two halves and push firmly together ensuring a complete seal is formed.
3. Push Trunk-Vac tightly into your exiting HVE suction handle connector (Trunk-vac is compatible with both 11mm and 16mm HVE fittings).
4. Turn on your suction.
5. Simply hook over the corner of your patient’s mouth.
6. After treatment completion simply pull off to remove and discard of Trunk-Vac in a clinical waste bin.
7. Trunk-vac is currently a single use only device.